Can some tell me which fuse holder near battery that goes to bildge manual bildge pump, can run wires from pump to battery and works , hook it to wireing and it has no power
Can some tell me which fuse holder near battery that goes to bildge manual bildge pump, can run wires from pump to battery and works , hook it to wireing and it has no power
Is there power coming from the switch?
Is the ground wire grounded?
Ground is hooked up, trying to figure out which fuse holder goes to pump where I can check it to see if it is bad, no blown fuses
Ground is hooked up, trying to figure out which fuse holder goes to pump where I can check it to see if it is bad, no blown fuses
Should be a breaker labeled bilge pump at the console.
Done checked that, which fuse holder goes to manual bildge pump, there are 3 back there, 3 amp, 5 amp and 20 amp
The manual bilge goes thru a breaker then switch then pump, I’m pretty sure. The automatic bilge has an inline fuse because it battery direct
You Don't Have Push Button Switches Do you??
If so,I'd say that's your problem
Reply With Quote