Helix 7 chirp si g2n at helm and chirp di g2n at bow. When coming off standby the screen I left it on is frozen and I have to toggle to the next screen view. This is frustrating as I want to just come off standby and go straight to the screen I had up when I put them in standby, I don’t want to have to toggle through my screens to get back to the one I was on. Am I missing something?
Mine's always on the Chart screen when I come off standby. Just one more button to push. Don't know what to do about it .
Don't worry Ma'am....
I'm only here for the Bass.
Must be a G2N thing. The Helix 7 CHIRP SI GPS G2 comes back with the view prior to Standby.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
It comes back with the prior view it’s that it is locked up. Sonar won’t scroll and depth/temp readings don’t change.Originally Posted by Wayne P.
Check your voltage readout before you use standby again.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
10-4. Just guessing that they are fine since my graphs are on the starter batt. for my 225 Optimax that fires right up no issue. But I will verify.
Last edited by Idaho Sandman; 05-18-2018 at 03:04 PM.
Reply With Quote