-
Member
power poles noisy after deployed and retracted
Dont know if this has been beat to death But I still want to ask. After I deploy the blades (both ) the pumps continue to run for about 4 seconds and does this after I retract them also. Doesn't seem to matter at what speed I select They also seem to be getting noisier at the fastest deploy speed. Any ideas or fixes would be appreciated
Last edited by Bullet20dc; 05-18-2018 at 04:56 AM.
Charlie B
Ranger Z521C w / 250 Yamaha SHO
-
BBC SPONSOR/ Shallow Water Anchors Moderator
-
Member
thank you very much for the info
Charlie B
Ranger Z521C w / 250 Yamaha SHO
-
BBC SPONSOR/ Shallow Water Anchors Moderator
yes sir
-
Member
thought id follow this up after running across this old post. Huge amount of buildup internally. Not sure what it is but the screens were completely clogged.
Pulled out the screens and cleaned them up, changed the oil, cleaned the reservoir, quiet as a church mouse now, no over run noise, Thank you
Charlie B
Ranger Z521C w / 250 Yamaha SHO
-
Fluid breaks down over time. It's always a good idea to swap fluid over time
-
BBC SPONSOR/ Shallow Water Anchors Moderator
we like to recommend to our customers to change out the fluid and check the screens every other year. Good preventative maintenance.