Originally Posted by
BigBadBass
So when I ordered my boat I opted to order w/o hydraulic so less to mess with. Now I enjoy my boat and try to squeeze everything I can out of it. If I could go back I would of done hydraulic. I don’t trust my local shops to re do a plate and I’m happy overall. I have a nitro z21 verado w 8” Manual slidemaster
What i I do want to ask is this. Currently I’m happily running a fury 24p 3. Fixed height from factory running 72-74 at 6100-6200 and 77 super light 6450 rpms. (Verado wot range 5800-6400) I really want to try the 4 blade fury. I am assuming I will need to stay same pitch and if anything increase to 25? As you all know that plate is a bear to adjust esp w a Verado. From what I’ve read 4 blades need to be raised... anyone run a fury 3 and 4. Same height with decent results? I honestly don’t want to keep raising and lowering depending which prop I have. Also because I have a transducer saver bracket for transducer to jack and would have to keep drilling for that as well.
Besides height, can a prop be worked on to
give similar results as raising a plate a little? Of course won’t be as good as raising but a small compromise is okay if I can keep same height and just simply swap props. Thanks fellas!