anyone running a 375V with a jackplate?

[mac87toy]

I have a 1989 375V that i just put a jackplate on. I was wandering if anyone else is running one on this boat also and what is your prop to pad measurement? Thanks for any help y'all can give me.

[Jtreed99]

I had one with a 6” Rebel Customs plate on it. Only 2 props I tried were a 27” shooter and a 24” raker. The shooter gets a bad rep but on that particular hull it ran well although it may have needed a 25”. I kept shooter about 4” below pad and ran the rakers 3.5” below. Never perfected either setup but was 63 mph loaded with each prop.