Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2005
    Cuba City

    livewell intake screen

    Anyone know who make the screen on the back of the boat for a 03 G3 HP 180? Tried TH and it was not correct.

    This would be the plastic piece about 2" round for the livewell mounted on the back of boat.

  3. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Abilene, TX
    Flow-Rite makes this one --->
    And TH Marine makes this one --->

    I thought TH Marine made a large plastic one, bu didn't see it on their site.

  4. Member
    Join Date
    Oct 2008
    Southbridge, VA
    A G3 dealer should be able to order one for you. My grandson busted my wind shield with a tungsten weight on my 02 Pro175 6years ago and the dealer ordered one for me dropped shipped to my house and it did not come from G3. $50.00

  5. Member
    Join Date
    May 2017
    Northern NJ
    I got all my replacement parts from Flowrite. Pay a little more but everything is right there on the website, easy to find and it fits!

  6. #5
    I'd like to know as well, if it's the same as mine. Mine came with a pretty flat plastic black screen. None of the stainless / rubber screens line up correctly. The way the screen on many G3s is designed, it requires your suction line to be flush with the washer, where many of these thread onto extra suction line sticking out of your boat. You can't use them unless you put in a new livewell pump. The black plastic version screws into a base that is flush around the washer.