New to me 201 evo with a 12 talon and 4 optimas, it feels like i dont have enough positive trim!! the prop is a 26 tempest plus and hydraulic jack plate. hole shot is fine at around 3 or 4 seconds and i dont need to bottom out the trim to prevent it from blowing out on takeoff, top end i've had it up to 73 before it starts getting to where i have to drive it. It seems like if i had just a bit more trim, the boat would be easier to drive above 70. It doesnt matter where the hydraulic jackplate is at. Higher up makes it handle a tad better. Has anyone else felt like they need more trim on the 201? I don't think adding cup to the prop would help because there's just not enough trim. Only way I know to add positive trim would be a wedge plate. Any other way? It seems kind of strange that this boat has been setup like this for this long and nobody else has tried to fix it. Not to be confused with LIFT, there is plenty of LIFT, it just can't lift but so high when i run out of trim. This is the best riding hull i have ever drove or rode in otherwise!