Page 2 of 2 FirstFirst 12
Results 21 to 36 of 36
  1. Member
    Join Date
    Aug 2017
    Location
    Gueydan Louisiana
    Posts
    34
    #21
    Mercury Tempest Plus 23P.
    2018 Express X19 Yamaha 175 VMAX SHO

  2. Member
    Join Date
    Apr 2018
    Location
    Greenwood SC
    Posts
    121
    #22
    I have the sho prop on my 175 x19. 2 guys tourny load, full tank of gas and 91 degrees out ran 62.4 on gps the other day. I just got the boat but I’m happy with those numbers. This is my first prop boat but even going 60 it drives its self. I’m blown away by the power with the 175. I wanted the 200 but found a great deal on a 2017 x 19 with a 2017 175 sho. The previous owner told me he upgraded to the sho prop and has it dialed in pretty good. Happy as could be!

  3. Member
    Join Date
    Mar 2018
    Location
    maryland
    Posts
    14
    #23
    Anybody run this boat with a 10” hydraulic jack plate? Does it run ok with the powertec or do I still need to swap the prop?

  4. Member
    Join Date
    Apr 2018
    Location
    Greenwood SC
    Posts
    121
    #24
    Pretty sure the concensius is get rid of the powertec.

  5. Member
    Join Date
    May 2017
    Location
    Columbia, SC
    Posts
    37
    #25
    Quote Originally Posted by Bowhuntercoop View Post
    I have the sho prop on my 175 x19. 2 guys tourny load, full tank of gas and 91 degrees out ran 62.4 on gps the other day. I just got the boat but I’m happy with those numbers. This is my first prop boat but even going 60 it drives its self. I’m blown away by the power with the 175. I wanted the 200 but found a great deal on a 2017 x 19 with a 2017 175 sho. The previous owner told me he upgraded to the sho prop and has it dialed in pretty good. Happy as could be!
    Do you mind sharing your ptp height and what pitch your sho prop is?

  6. Member
    Join Date
    Apr 2018
    Location
    Greenwood SC
    Posts
    121
    #26
    Quote Originally Posted by Xpress4Sho View Post
    Do you mind sharing your ptp height and what pitch your sho prop is?
    Sure thing! I’m on vacation at the moment but will measure everything and get back to ya once I’m home. Let me txt the previous owner because he prolly had it written down. I know it took him some time to get it dialed in. Off the top of my head I think it’s the 23 pitch sho prop but I will check for ya. How’s ur x19? I txted ya last week when I went to buy mine. Shoot me a pm if ya want and will still try to meet up on Murray this summer!
    2017 x19 175 sho

  7. Member
    Join Date
    May 2018
    Location
    Alabama
    Posts
    9
    #27
    I have a 2018 X19 175 SHO with 10". PT prop stinks. Have to over trim to get to 5400 and go 54 MPH. Way to much bow lift. Just received a 24 tempest blueprinted by Mark. Haven't put it on yet. Will this weekend and let you know how it runs.
    2018 Xpress X19, Yamaha SHO 175, 10" Jack Plate, Helix 9 Mega SI, Helix 12 SI, Ulterra 80 Lb

  8. Member
    Join Date
    Dec 2008
    Location
    Mount Ida
    Posts
    286
    #28
    Has anyone seen or know performance nunbers on the X19 with a 200 SHO? I would think a tad more top end than the 175. I called a very good prop guy and he reccomended the 24 or 25 sho or t2 prop for the 200.

  9. Member
    Join Date
    Apr 2018
    Location
    Florida
    Posts
    17
    #29
    Rdeep, I’m interested to see hear what that set up does for you.

  10. Member
    Join Date
    May 2018
    Location
    Alabama
    Posts
    9
    #30
    Rain and big wind all weekend so didn't get to run it.
    2018 Xpress X19, Yamaha SHO 175, 10" Jack Plate, Helix 9 Mega SI, Helix 12 SI, Ulterra 80 Lb

  11. Joe4d
    Guest
    #31
    Quote Originally Posted by Dsand View Post
    Has anyone seen or know performance nunbers on the X19 with a 200 SHO? I would think a tad more top end than the 175. I called a very good prop guy and he reccomended the 24 or 25 sho or t2 prop for the 200.
    On express websight they have it at 70, 10" jack plate, 25 pitch SHO prop.
    What I am intrigued by is the 2.8 L F 200.. basically same engine as the 175 SHO but more power and lighter than the V6,,, Splits the difference between the 2 however they seem to be setting that engine up for failure. the 2.8 200 is being tested with the power tech AND its sitting an inch lower than either the 200 or 175 SHO, which also are running the SHO props.
    Put a 25 tempest on that 2.8 200,,, set it at 3.5,, bet it would be touching 70,,,

  12. Member
    Join Date
    Jun 2014
    Location
    Hector arkansas
    Posts
    488
    #32
    Quote Originally Posted by Joe4d View Post
    On express websight they have it at 70, 10" jack plate, 25 pitch SHO prop.
    What I am intrigued by is the 2.8 L F 200.. basically same engine as the 175 SHO but more power and lighter than the V6,,, Splits the difference between the 2 however they seem to be setting that engine up for failure. the 2.8 200 is being tested with the power tech AND its sitting an inch lower than either the 200 or 175 SHO, which also are running the SHO props.
    Put a 25 tempest on that 2.8 200,,, set it at 3.5,, bet it would be touching 70,,,
    Bowhunter did you buy that x19 from a guy in Louisiana or south Arkansas .If it is the Boat I think it is that show prop has been worked .

  13. Member
    Join Date
    Apr 2018
    Location
    Greenwood SC
    Posts
    121
    #33
    Quote Originally Posted by Nickl View Post
    Bowhunter did you buy that x19 from a guy in Louisiana or south Arkansas .If it is the Boat I think it is that show prop has been worked .
    Bought it from a guy in north west Florida. He bought it from Andalusia marine. I know it has the sho prop not 100 percent sure if it was worked or not. Had the boat out today by myself. Saw 5800-5900 rpm and around 60-62mph. Slight wind but the lake was alittle choppy and it was 95 degrees. I think the numbers are good though. I ended up cruising 40-50mph, plenty fast enough. The mid range power and torque on the sho is insane! Caught a few spots and largemouth drop shorting, it was a fun day!
    2017 x19 175 sho

  14. Member
    Join Date
    Jul 2018
    Location
    Baton Rouge
    Posts
    55
    #34
    New member here not new to Xpress as this is my third boat. Ordered 3/30 and took delivery of my x19 175 sho Friday. 10” jackplate factoryset, 23 pitch powertech. Turbo FXP on backorder expected in late August. Saturday shakedown run was two hours of easy throttle then a few wot blast. Hole shot was not impressive. Prop would blowout in turns and engine maxed out at 5000 rpm’s around 54.6 mph. Boat has sea deck, 20 gal of fuel with me and son in law and very little tackle on board. Can’t wait to work out the bugs. Love the boat. Much more stable than my H51-115 or my H17 pro-90 was. Plenty of good advice on this board, thanks.
    2019 x19 175 SHO 12” Bobs jack plate

  15. Member
    Join Date
    Jul 2014
    Location
    KALKASKA MICHIGAN
    Posts
    4,066
    #35
    Quote Originally Posted by Dsand View Post
    Has anyone seen or know performance nunbers on the X19 with a 200 SHO? I would think a tad more top end than the 175. I called a very good prop guy and he reccomended the 24 or 25 sho or t2 prop for the 200.
    Tbob could tell you exactly where you need to be. Cj
    2002 X19 200HP OX66 HO Vmax,HPDI lower, it lives, thanks Hydro Tec.

  16. Member
    Join Date
    May 2018
    Location
    Alabama
    Posts
    9
    #36

    X19 with 175 SHO, 10inch Manual Jack Plate. 24 Tempest Blueprinted by Mark Croxton.

    Quote Originally Posted by Estott View Post
    Rdeep, I’m interested to see hear what that set up does for you.
    Finally ran it today. 94 degrees, 104 Heat index. Rough chop. Exact same set up as PT. With 500 pounds of passenger, full tourny load, and 1/2 Tank of gas ran 58. 4 MPH faster than the PT. With Just me and same rest of load ran 60 in rough water. Again 4 MPH faster than PT (smooth water). Need to raise the Jack Plate another inch or 2. Couldn't really let her rip in the conditions today.
    2018 Xpress X19, Yamaha SHO 175, 10" Jack Plate, Helix 9 Mega SI, Helix 12 SI, Ulterra 80 Lb

Page 2 of 2 FirstFirst 12