Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 57
  1. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #21
    Some parts are coming in;


  2. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #22
    Some more hardware from Livorsi Marine came in:






  3. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #23
    Here is episode 9 of Project Activator, we look at the floor and the tank is installed. Last week we posted some pictures of new Livorsi gauges, but we changed our mind on the size and color, so we talk about that too.


    And, we disclose the color we are painting it, plus a hint as to what engine we got. See if you can guess.


  4. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #24
    Some more pictures and details here: https://www.wavetowave.com/home/2018...r-installation

    Here's an example of the gauges we originally got, can you see the white ring between the dial and the rim? It kind of changed the look for me. The new oversize ones will look better.


  5. Member
    Join Date
    Nov 2012
    Location
    Nederland, Tx
    Posts
    13,619
    #25
    Sounds like a g2 is the motor

  6. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #26
    Quote Originally Posted by kry29 View Post
    Sounds like a g2 is the motor
    Good guess!

  7. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #27
    The floor is getting glassed in.




  8. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #28
    New gauges arrived, I think these will look way better. Boat is going to be silver. The wind fairing and center of deck might be black.


  9. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #29
    Floor




  10. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #30
    Wind deflectors from Finney's



    Angled and curved

  11. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #31
    Episode 10 is up. We talk about the floor, turn the boat over to blueprint the hull. Plus we talk about the engine choice.


  12. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #32

  13. Member CastingCall's Avatar
    Join Date
    May 2012
    Location
    MN
    Posts
    5,058
    #33
    Anxious to see the color(s) applied!

  14. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #34
    Quote Originally Posted by CastingCall View Post
    Anxious to see the color(s) applied!
    Ya, me too! Can't wait to get on the water. These projects always take longer than expected!!

  15. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #35
    Sorry for the major delay. I have an article updating the project. I got really busy, and everything got put on hold for a while, but now a bunch of progress has been made.

    Hull is repaired and primed with Awlgrip epoxy primer

    Article
    https://www.wavetowave.com/home/2018...ing-and-update


  16. Member
    Join Date
    Jun 2005
    Location
    Hendersonville TN
    Posts
    5,447
    #36
    If I am reading this latest correctly you have not yet run the G2 HO. Well let me tell you that, if propped reasonably correct for your first runs and PTP is nominally 3.25" or slightly higher, put your best Ghost Rider Ray Bans on and "buzz the tower". You will understand what fighter jocks feel when they punch it.

  17. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #37
    Been bad at updating this project here. But, we have made serious progress. Here's both episode 13, and 14 in the next post.


  18. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #38
    Here's episode 14, we have the boat primed, ready to paint. And we show finished splash well filled, plus the new rub rail we are going with.


  19. Member Wave to Wave's Avatar
    Join Date
    Apr 2018
    Location
    Miami Fl
    Posts
    317
    #39
    We have paint on the boat now. Color is Porsche GT silver metallic. Not finished yet, but getting there.

    22 Activator painted 1

  20. Member
    Join Date
    Jan 2017
    Location
    Columbia, S.C.
    Posts
    115
    #40
    Boat looks ANGRY ! Actually it looks pissed off. Can’t wait to see an outboard hanging off the transom.

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread