Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2009
    Location
    Bernville
    Posts
    111

    Need some simple ideas for transducer problem

    My minn Kota has the skeg and prop at opposite ends and there’s not enough room to fit the transducer between. I made a temporary rig by mounting it against the side of the skeg a cutting aluminum shims to slide in under the side of the bracket to help level the transducer. Need a better fix. Any ideas for a nonengineer?

  2.  
  3. Member
    Join Date
    Apr 2009
    Location
    Illnois
    Posts
    649
    #2
    Call Transducer Shield & Saver 334-514-7147
    I’m seem to recall a lot of some sort for when the skeg is in the way.

  4. Member
    Join Date
    Nov 2009
    Location
    Bernville
    Posts
    111
    #3
    Thanks jig34 but they said they don’t have anything for that.

    Todd

  5. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,201
    #4
    I have a cpt100DVS mounted on my Minnkota with a shield and saver without issue.

  6. Member
    Join Date
    Nov 2009
    Location
    Bernville
    Posts
    111
    #5
    Is the skeg and prop on opposite sides? Can you post a picture?

    Todd

  7. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,201
    #6
    Oops sorry there on opposite sides

    Attached Images Attached Images