Has any one used one of the MotorGuide removable mounting plates on their Bullet like this one?
I still try to find a mount of some kind to replace the MG rubber isolaters, I cant reach the front 2
mounting bolts to install fender washers and lock nuts.
Does your wife have small arms? Mine helped me on my last one
My wife had to do mine too....
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Ted let out one of his secrets
I used a long wrench with tape on the backside to hold the nut. Sent my mini fishing partner up into the center storage on one of my bullets. Had to drag him back out but he got there
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Recessed tray helped me alot.
Well, my wife could reach all but the front 2 bolts also. So this is what we came up with, I took my die-grinder and a carbide bit and opened up the hole behind the front cover plate just enough to get my arm through and the plate still covers the enlarged hole. Thanks for the suggestions.
I did that on my old Stratos but my arm wouldn’t fit nowadaysOriginally Posted by theblurr
2008 BULLET 21XD 2007 Merc 300xs
Reply With Quote
