I have a 1995 195 charger with a 200hp 08 optimax - 2.5 p2p -12 inch jack plate. Chine walking at 64_65 mph. Any help would be appreciated.
I have a 1995 195 charger with a 200hp 08 optimax - 2.5 p2p -12 inch jack plate. Chine walking at 64_65 mph. Any help would be appreciated.
Last edited by wesley t; 05-03-2018 at 03:57 PM.
Not sure what a 12" will do on a Charger never drove one with that much set back. 2.5 seems just a little high my 186 liked it about 2-3/4" p2p run 65 gps with no walk at all. You could take your hands off the wheel on long open runs.
It has to be the 12" jp. I had a 98 or 97 195 and it would run right at 70 without any walking. It would get start getting real light right at WOT. Like 71 would've been the moment. I had a 6 or 8" jp. What prop?
What prop were you running ?
Raise it to 2-21/2 prop to pad and it may need to go a tad higher being it has 12 inch.
sorry . Its already 2.5 prop to pad . I miss stated in first post. Thanks
Raise it some more I have ran 12 inch plates and the motor needs to be high as it’s farther back and it’s deeper in the water
Ok I will give that a try . Let you know how it does.
thanks
Thanks for the help raised motor to 2 inches p2p no more chine. Now I need to find the right prop
Stick a worked Croxton 25-26 tempest on it you will be hauling ass!