Confirm this transducer cable clamp

[Corkpuller]

Can one of y'all confirm the correct size of these gizmos? there are different sizes.

https://www.amazon.com/dp/B00QICJEIS...v_ov_lig_dp_it

For use on capturing the transducer cable on troll motor.
Humminbird Helix MDI xducer on an Ultrex troll motor.

Thank you

[DougL58]

I'll have to check my package at home. The one I used was a bit small but it stretches out and works fine. You can see pics in the post I have on my cable solution for the Ultrex.

[kry29]

That's the same ones I got. They work good but I think you could go one size bigger also

[Corkpuller]

Thanks fellers.

Can anyone confirm what kry said.
one size up or the ones that's in the link above?

[DougL58]

Yes, this is the size I got. 3/16" - 1/4" Part #1010. Could go one size bigger I think but I don't know if they have one.

[SoonerFan]

Can one of y'all confirm the correct size of these gizmos? there are different sizes.

https://www.amazon.com/dp/B00QICJEIS...v_ov_lig_dp_it

For use on capturing the transducer cable on troll motor.
Humminbird Helix MDI xducer on an Ultrex troll motor.

Thank you

The ones that fit my HB Transducer cable are the 7.14mm to 9.53mm. They fit completely around the cable without spreading out.

[SoonerFan]

[RazorCat]

Can one of y'all confirm the correct size of these gizmos? there are different sizes.

https://www.amazon.com/dp/B00QICJEIS...v_ov_lig_dp_it

For use on capturing the transducer cable on troll motor.
Humminbird Helix MDI xducer on an Ultrex troll motor.

Thank you

The one shown is the one I used. TroyBoy30 was kind enough to send me some. I purchased additional 1010 clamps to add to them. Fit perfectly on the cable for my Lowrance pod mount TM transducer. The XL size would have been too big and let the cable slide around.
The Cobraties that come with them make for a really neat install.

[Corkpuller]

The ones that fit my HB Transducer cable are the 7.14mm to 9.53mm. They fit completely around the cable without spreading out.

So that being said the ones in the link I posted are not what I want. Right? or wrong?

[Corkpuller]

End result is get the right ones.
If y'all could point my dummass to a link or somewhere to source the "correct" clamps, I'd appreciate it.

I don't do "close enough", I want dead nutts right.

THANKS !!

[billnorman1]

Read the reviews from users on Amazon. Said they used it for that purpose.

[TroyBoy30]

ive only been able to find the one size on amazon. i need the large size for the humminbird mega cable

http://www.cobraties.com/flexroute.html

[kry29]

End result is get the right ones.
If y'all could point my dummass to a link or somewhere to source the "correct" clamps, I'd appreciate it.

I don't do "close enough", I want dead nutts right.

THANKS !!

If you can find the larger size that's what you need to get. It's called the flexroute xl but I didn't find it. They are really popular with bike builders so you could check some bicycle shops

[TroyBoy30]

if someone finds it post a link. I even tried to contact them directly but got no answer

[Corkpuller]

ive only been able to find the one size on amazon. i need the large size for the humminbird mega cable

http://www.cobraties.com/flexroute.html

BINGO!

I knew someone had posted that picture before and I could not find it again. Thanks!

[TroyBoy30]

http://www.bbcboards.net/showthread.php?t=904248

[depdog60]

subscribed

[TroyBoy30]

this is the larger size on a humminbird mega transducer cable