Swimbait Head mold ???? Where !!!!

[20LBag]

Can someone please tell me where I can find these molds for my swimbaits ???? I’m looking to pour heads from
1/8 -3/6 for small swimbaits and 1/4-3/4 for bigger swimbaits w a 4/0... looked everywhere and I cannot find anything ..!!!! Thanks in advance for the help

[basscat28]

https://store.do-itmolds.com/Worm-No...-38_p_559.html

[Walking Dead]

https://www.barlowstackle.com/Do-It-...Mold-P337.aspx

[20LBag]

Alright here’s my question / problem .... I wanted to double dip w/ these heads and use them on an A-rig and single swimbait application.... do they make a ball head mold / worm nose that’s 1/8 Oz to take a 4/0?? When you look at the molds and the hook size is engraved under the specific head is that the biggest size that cavity takes ???? So for example if a 1/8 Oz cavity says size 1 can i put a 4/0 in or is that a no...? Thanks guys

[Bryanmc57]

You just need to get out your dremel and modify the mold a little.

[20LBag]

Thanks guys