Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Feb 2008
    Location
    Hazard Kentucky
    Posts
    666

    Question Few axiom questions

    Ok got my axiom installed with transducer on my jackplate with raymarine mount. Out on the water the first time yesterday.
    How do you activate auto chart live?
    What are the best setting for down and side imaging such as scroll speed or any other key setting for best imaging?
    What should the scroll
    Speed be set on for 2d.
    For A scope what Is the best settings for like drop shot (video game fishing)
    I am sure I will have more questions as I go. But so far super impressed with this unit looking forward to get one for the bow as well

  2.  
  3. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,107
    #2
    Select a chart app( highlight the box)
    select the menu top right of the box three lines.
    select setting, three cogs on the bottom.
    in the middle is depth and settings, it’s half way down.

    Hope this is right going by memory!

  4. Member
    Join Date
    Feb 2008
    Location
    Hazard Kentucky
    Posts
    666
    #3
    What about the settings for each view like scroll speed and such to get best images.

  5. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,107
    #4
    I run mine around 60-70 but haven’t played with them much.
    Sold a boat and went a few months without one and just getting my boat dialed in now.

  6. Member
    Join Date
    Aug 2011
    Location
    McMinnville
    Posts
    66
    #5
    Scott, I had to register my Navionics map card before some of the mapping features showed up (like SonaChart Live).