Anyone know if there is an aftermarket bulkhead grommet that can be put on my hydraulic steering lines? I need to move mine because the extra hole that my mechanic put in is too low in the splash well and it’s letting water in.
Thanks in advance.
Anyone know if there is an aftermarket bulkhead grommet that can be put on my hydraulic steering lines? I need to move mine because the extra hole that my mechanic put in is too low in the splash well and it’s letting water in.
Thanks in advance.
While I would be looking for a plug. I would also be looking for a mechanic.
Plumbing places sell rubber test plugs. All sizes. The center wing nut expands the plug. Measure the hole. Buy a plug.
I put them on the inside of my hull drain openings. Lets me do a easy flush on plane after each rain.
USE ONLY finger pressure to tighten. Some have cheap wing nuts. You can rplace the nut & bolt with S S to prevent rust jams.
You might look at Del City. I think I saw the bulkhead fittings in their catalog.
TH Marine distributes several types.
99' 201 Pro Elite
08' Evinrude 225 HO