2010 Mercury 250 XS
SN# 1B791202
MOD. 192847GHD
250 DFI L XS
I need a parts list to replace the upper motor mounts.
I have already decided to use Bob's Machine solid mounts. I have installed them on a 2001 Mercury 225 EFI.
Thanks!!!
2010 Mercury 250 XS
SN# 1B791202
MOD. 192847GHD
250 DFI L XS
I need a parts list to replace the upper motor mounts.
I have already decided to use Bob's Machine solid mounts. I have installed them on a 2001 Mercury 225 EFI.
Thanks!!!
250 uses hard mounts...
If you want to order or price Mercury Engine Parts or Accessories...
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Don,
I know, but they are broken.
I'm going with solids.
I was looking for recommended parts list to do the job.
I know I will need powerhead base gasket, just wasn't sure of the little trink it parts to complete the job.
Thanks
change it to XS plates no more broken mounts some on here will testify, can I get a amen
.................................................. ...the scariest thing in life is the unknown ...................................
Amen Joe!
for some reason I cant view photo ,what is it of ?????
.................................................. ...the scariest thing in life is the unknown ...................................
Needs to update his Pbucket account for 3rd party hosting.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
its a pic of my last boat
I NEED THE INFO ON THE XS PLATES YOU ARE TALKING ABOUT!!!!!
I need to order the parts. I'm going to order Bob's SOLIDS if I don't get any info on those XS PLATES!!!
My motor is a XS racing with HARDENED upper motor mounts!
They are obviously busted, 2" of movement by pulling forward and aft on top of motor.
I was looking for a parts list of everything I need to order to complete this job.
Obviously upper mounts and powerhead base gasket BUT WHATELSE????
THANKS
None of your pictures work. XS has solid mounts already.
WASN'T A PIC OF THE PROBLEM! THAT WAS MY SIGNATURE!
I know it had RIGID MOUNTS, they are busted!
I need a parts list to complete the JOB!
Since everyone was posting AMEN to XS PLATES I wanted to know WTF they were!
I'M going with SOLID ALUMINUM Bob's Machine mounts.
I was looking for a list of parts that I will need when lifting the powerhead off the mid section to get at the upper mounts.
EXAMPLE: power head base gasket, radius zip ties, or any other parts.
I have completed a solid upper motor mount job on an older motor, never did it on an Optimax and it is well out of warranty.
Thanks for all the help. I'll figure it all out on my own.
You have an XS, so you already have the XS adapter plate that Joe54 is talking about. The mount system on the XS is not the same as the EFI, that you did, but having said that you will need the same gaskets and zip ties that you used when you changed mounts on your EFI.
might also remind him that you cant change XS mounts gota replace adapt plate complete 842777a04 uh oh
.................................................. ...the scariest thing in life is the unknown ...................................
.................................................. ...the scariest thing in life is the unknown ...................................
looking at parts pictorials, anything that might have come loose in there?
Anyway to switch adapter plate to accept older style mounts like Bob's Machine solids?
THANKS