Slung a blade on 28 Bravo, is there a prop chart for 21's like the sticky for 20's?

[HankinBama]

If not suggestions would be cool

Fishing prop but definitely still like to go fast

13 21 XRD
13 250 PXS
TM, 1.75

[cbp84]

1/2 to 3/4" Below pad
Welcome to the club
Had it been labed? What were you doing when she slung?

[HankinBama]

Not sure what labed means cbp

Was just running normal down the river, maybe 70 or so

[cbp84]

Lab finishing refers to the process used to insure the accuracy of the propeller rake angle, pitch, progression, pitch variation and cup. This hand process involves thinning the blades and sharpening the leading edges.

[crank68]

Your gonna loose a blade at some point but you really need to check the prop extremely well each trip for the small hairlines that turn into lost blades....

[Tim Powell]

TM 1 or TM 2?

[HankinBama]

Not sure Tim, how would I know?

[cbp84]

Tm2 has 3 water intakes on each side, 6 total

[HankinBama]

this one has 6 per side so I assume its a TM1?

[cbp84]

You mean 8?

[HankinBama]

Yep, it’s 8, looking at a pic on a phone and half blind

[cbp84]

Tm 1

[cbp84]

What was your prop to pad? What is your water psi over 5000 rpms?

[HankinBama]

3/4 below
15+

[Leebob]

28 BravoXS, 27 TXP, 28 XOB Hydro all will work good.

[Tim Powell]

28 BravoXS, 27 TXP, 28 XOB Hydro all will work good.

^^^This. I would add a 29 Bravo XS and a 28 Promax to the list as well.

Set the bravos at 3/4" below and the rest at 1/2" below. Dont mess with plugging the top 4 I takes as it's not needed at those heights and there isn't enough of a gain to worry about running it any higher.

The Bravo and Hydromotive X/OB will have the best holeshot, the XOB will be the fastest, the Promax will be the second fastest, best midrange, and worst holeshot.

[HankinBama]

Thanks guys

much appreciated

[mercpromax]

I've Got A TXP 26 Pitch, 4 Blade W/ 8 Vent Holes.