Results 1 to 3 of 3
  1. #1
    Rick Elrod hotrodelrod's Avatar
    Join Date
    Aug 2009
    Location
    Berryville
    Posts
    330

    03 200 OX66 help

    I changed fuel/water seperator and primer ball at the same time. I did not fill the seperator up before installing. I went to the lake and you guessed it , no start. Unable to get pressure with bulb. Removed the seperator and filled and replaced. Still cant get pressure with bulb. Pump is running at power up but it seems like its not getting fuel. Primer bulb it oriented in the right direction. Any ideas?

    Rick Elrod

  2. Member
    Join Date
    Nov 2004
    Location
    Columbus, Indiana
    Posts
    4,234
    #2
    If you have fuel in the filter, then just keep pumping.

  3. Member HaulinBass's Avatar
    Join Date
    Jun 2004
    Location
    Springfield
    Posts
    6,323
    #3
    Check to see if you have fuel pressure at the rail and work your way back. My guess is the squeeze bulb. Switch it out with the old one and recheck. Confirm the arrow points towards the engine as the fuel hose can wrap around and appear to be in the correct direction when it’s not.
    Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
    "Romans 10:9"