Anyone know if there is a setting to allow the fishing depth range highlight to be set on single digit increments vs by 10's. A 0, 10, 20, 30...Ft range is not overly useful in shallow water lakes (winnebago). I have a smaller Simrad with the same Navionics card that gives you full selection. I'm hoping I am just missing something vs. enhancement request.
Thanks
The 10' limitation makes the feature rather useless for freshwater fishing. Any hope this will be remedied in future versions? My Simrad unit is able to use the same Navionics HotMaps Platinum and select the Fishing Range by 1' increments so the card isn't the problem.
Use Sonar Chart live map for a while and let me know how accurate the base map is/was. The picture below is of the same body of water. Split screen showing Nav+ On the left and Sonar Chart Live mapped on the right. So what 1’ contour line are you following.
The point is in either case it couldn't be highlighted as on other brands. I've seen the same map discrepancies on LakeMaster as on Navionics...not debating that point. However, if the unit allows me to selectively shade to pinpoint some depths, I have reasonable starting points. Ultimately, the answer is - Raymarine doesn't have this feature. If Raymarine wants the freshwater market, it will require similar features to the competition to be relevant. I have the Axiom 12 RV and 9 RV along with the Simrad unit...so obviously I'm along for the ride.