Tilt And Trim Problem

[TWalters17]

I have a 2006 Yamaha Z200TLRD on a Skeeter ZX200. When it was trimming up, you could hear a crackling noise. I tried bleeding it, and no matter how many times I did this, air was always coming out. I took all of the tilt and trim fluid out and it all came out milky. I put new in, and it kept doing the same thing. I put the motor all the way up, and put the support lever down to hold the motor up, and now the trim won’t go up far enough to take the weight off of the levers so that I can put the motor down. So, what could be causing these issues?

[201pro]

Is it milky from water or just aerated fluid?
Either way, you probably have cap seals leaking.
Let the air settle out for a bit and then you can remove fill cap and top off the fluid and it should go up.
May just let it sit and try it and it may go up the rest of the way.