Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354

    93 Evinrude intruder won't crank.

    Can anybody tell me how to bypass the neutral safety switch. I'm at the ramp and my motor won't crank all my batteries are charged nothing happens when I turn the key

  2. Ohio Fishing Reports Moderator omcforever's Avatar
    Join Date
    Nov 2007
    Location
    Miamisburg Ohio/Formerly Aiken SC
    Posts
    20,052
    #2
    Check all your connections and especially at the battery and solenoid first. (hope you dont have wing nuts on the batteries)Make sure kill switch is hooked up(lanyard)

    Age and treachery will always overcome youth and skill !!

  3. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #3
    All connections are tight. Checked kill switch. Checked starter leads voltmeter shows 12.88 at the starter

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,247
    #4
    Put pressure either forward or reverse on the shift handle, or move it back and forth a few times. Then try and crank it.

  5. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #5
    Ive tried that as well. Still won't crank

  6. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #6
    Crossing out the solenoid does not engage the starter. Bad starter maybe?

  7. Member
    Join Date
    Oct 2009
    Location
    Meridian, MS
    Posts
    763
    #7
    starter would be culprit

  8. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #8
    I replaced the solenoid and the starter this morning. Still will not turn over

  9. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #9
    Model# VE175GLETR

  10. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,247
    #10
    20 amp fuse blown?

  11. Member
    Join Date
    Dec 2015
    Location
    Charlotte Tn
    Posts
    354
    #11
    Got the no crank problem fixed. Motor turns over now but no spark. How do I bypass the kill switch?