-
Help with a Triton TR186 setup
Just repowered my 2006 TR186 with a 2018 Yamaha F175 and would like some guidance with engine height and prop selection. It has a 10” manual Jack plate, I also have a 6” plate that came with the boat. Any help would be greatly appreciated. I live in Australia, and there is not a lot of information available here. Thanks Mick.
-
Start at 3" under and raise it up 1/4" at a time until you gain rpm's but not speed, lose bow lift or water pressure then back it down 1/4 and run it.
-
Thank you, Im going out this morning, so I'll set it at that and see how it performs. Thanks again