Guys my Fury 4 24 pitch will run 66 MPH, I ran a Fury 3 24 Pitch (same prop to pad height) and it would only run 60 MPH. I assume the Fury 3 needs to be run higher.
Guys my Fury 4 24 pitch will run 66 MPH, I ran a Fury 3 24 Pitch (same prop to pad height) and it would only run 60 MPH. I assume the Fury 3 needs to be run higher.
What boat/motor? My Fury4 needed to run much higher than my Fury3 (both 26P) to get close to the top speed of the Fury3.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
2016 Z521c 250 pro xs
Yes. I was running a 24p fury 3 and when I swapped to the 4 I had to lower my prop to pad. 225 pro xs on a ranger 119c
You're the first person I've seen that has lowered p2p when going to the 4 blade. When I had a 518c I raised my p2p an inch for the fury 4 from where I was running a tempest. The fury 3 likes to be deeper.Originally Posted by spotdog1
Post the rpms with each prop. Something is odd about this.
24 Pitch fury 4 5850 rpm Med/Heavy load 66mph
24 Pitch fury 3 5800 rpm Med/Heavy load 60 mph
2-1/2 - 2-1/4 below pad
I am lost for words.
Maybe your fury 3 needs work.
When I got my fury 4 I had to go up and up and up and im still going up. Was running a 25 tempest.. fury 4 is with Mark now for B and B and tip cup Going to go up another 1/4" and see what we get when I get it back. seeing some of my best numbers with a fantastic holeshot..I love this prop.
Reply With Quote
