Thread: 21 XRS Setup

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Feb 2014
    Location
    Wi
    Posts
    15

    21 XRS Setup

    Just purchased a new 21 XRS and was wondering if anyone could give some direction on the setup of the boat, prop, height an setback if possible. It's being rigged with a 300XS and the most recent DBR kit with 1.75 sportmaster. Dealer cautioned me about the boat that they can lose lift at high speeds and get out of control quickly if the prop loses it's bite. I'm staring out with a Promax prop but he mentioned I should have someone work my prop for this type of boat. I previously had the XS on a Champion but i'm sure the Bullet is a completely different animal and appreciate any feedback that would help with this setup. Thanks in advance for any advice!!

    Craig

  2. Member
    Join Date
    Dec 2004
    Location
    Kissimmee,FL.
    Posts
    231
    #2
    Craig,
    You should ask these questions on the Bullet boat forum. I'm a Bullet owner but no experience with the xrs

  3. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #3
    Call and talk to Mark Croxton about the prop and what it needs to have done to it.