Results 1 to 7 of 7
  1. #1
    Member K-DAWG's Avatar
    Join Date
    Apr 2007
    Location
    Kingsland, GA
    Posts
    7,015

    Hard wires switches power pole?

    Is there a way to get rid of the batteries on the wireless power pole switches and hard wire them in?

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #2
    No, not sure why you would want to. Im on 3rd year w same batteries and still going strong.

  3. Member K-DAWG's Avatar
    Join Date
    Apr 2007
    Location
    Kingsland, GA
    Posts
    7,015
    #3
    I'm on my 3 set of batteries in the dash switch and the lanyard in like a year.

  4. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #4
    Then you have a issue..reach out to Power Pole. I havent replaced batteries in any switches or remotes in 3 years.

  5. BBC SPONSOR
    Join Date
    Jan 2007
    Location
    Tampa, FL
    Posts
    350
    #5
    K-Dawg - Give us a call at 813-689-9932 opt 2 for tech support. More often than not a software update fixes this issue and we can walk you through doing that. We can provide you with a fresh set of batteries or 3 if you'd like us to replace the ones you've previously bought. Once the pump software is updated, the pump will send an update command to the paired controllers and your problem should be solved.

    Please let me know if you need any further assistance.

  6. Member K-DAWG's Avatar
    Join Date
    Apr 2007
    Location
    Kingsland, GA
    Posts
    7,015
    #6
    Wow awesome. It will be tomorrow afternoon before I can call thanks.

  7. Member
    Join Date
    Apr 2013
    Location
    TX
    Posts
    3,464
    #7
    yah call them, all mine are good still after a year and a half, but you probably jynxed me