Question for Tracker pt 190 with 115 owners!

[jyu87]

Probably, Seems like most boat makers just go with a generic setup and leave it to the new owner to fine tune it the way they want it. And congrats on the new boat! Your gonna love it!

Fishtracks, where did you install your Vessel View?

[1kwksvt]

Probably, Seems like most boat makers just go with a generic setup and leave it to the new owner to fine tune it the way they want it. And congrats on the new boat! Your gonna love it!

Thanks I hope so

[Fishtracks]

Fishtracks, where did you install your Vessel View?

I have the vessel view mobil. I had it installed as i was walking out the door at the dealer but it just plugs in, took longer to download the app than to install the hardware! Really easy install and set up. Plugs in under the engine cover.

[atxtracker]

Any pictures of before and after the motor move?

[Usafpropjock]

Awesome info guys. Just got my 2019 pt 190tx with the 115 fs. Its not the pro-xs. Will all this still work?

[michiganboater]

My 115 ProXS was only hitting 40 mph and about 5000 rpm initially. My dealer was ZERO help when I asked them what was going on.
I read about the X7 prop so I decided to try it. It gave me 5 mph and about 600 rpm, but still left me well below what the factory says I should be getting.

I didnt think about the mounting holes as a cause until I found this thread. My motor is mounted like most others I think. Top hole (motor is lowest in the water), so I am going to lower it down two holes which will move the motor up a good bit. Hopefully that will get me closer to the 6300 max rpm from the ProXS.

[Fishtracks]

It will run and drive like a different boat!

[GeauxTide]

My 2017 PT190 with 115Pro xs was initially in the 2nd hole. The most I could get out of my boat was 5500RPM with the stock aluminum prop. I changed prop to the stainless X7 19" and raised the engine to the 3rd hole. What an amazing difference. It now pegs right at 6300rpm with a top end at 50-51mph depending on load and water conditions. Zero porpoising and all round great boat control.

Datz Rite. My hull weighs more than the 190 and I'm turning an X19.