-
23m prop castleated hub insert
Anybody know where I can find the hardware to go from a castlated hub insert to a regular hub?
-
Having problems gettin this 23 m prop tight on my mercury shaft. It does have the mercury hub in the prop but when I go
to tighten it down I run out of threads on prop shaft any ideas do I need a diff thrust washer s
-
You need a kit that’s is made for running yahama props on Mercs
-
Moderator
-
So do I need the front washer also along with this castle nut also ??
-
Moderator
If you have the correct thrust washer, All you need is the part I posted for the splines to fit and engage. Then you use the tab washer under the nut to keep the prop from coming loose.
-
I am
guessimg i do not have the correct thrust washer for this prop as the one I have is fro
s trophy prop do you by chance know the part number for
thr thrust washer thanks
-
Got the problem fixed just needed that castleated nut thanks
guys for all the help now to test it
-
Tested her out today wot 5900 rpm s gps was 64.5 fully trimmed no rooster tsul
a d great bow lift. My 184 was screaming that was with 1/8 of fuel and very little
tackle so rpm shiuld drop but wow wat a diff in performance and speed gains 59-64 can’t complain bout that thanks again everyone for
thr help