Results 1 to 9 of 9
  1. 04-13-2018, 07:34 PM #1
    Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555

    23m prop castleated hub insert

    Anybody know where I can find the hardware to go from a castlated hub insert to a regular hub?
    Reply With Quote Reply With Quote
  2. Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555
    #2 04-15-2018, 01:02 PM
    Having problems gettin this 23 m prop tight on my mercury shaft. It does have the mercury hub in the prop but when I go
    to tighten it down I run out of threads on prop shaft any ideas do I need a diff thrust washer s
    Reply With Quote Reply With Quote
  3. Gsmith223
    Gsmith223 is online now
    Member
    Join Date
    Feb 2011
    Location
    Ellettsville IN
    Posts
    4,141
    #3 04-16-2018, 04:16 PM
    You need a kit that’s is made for running yahama props on Mercs
    Reply With Quote Reply With Quote
  4. 21XDC
    21XDC is online now
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #4 04-17-2018, 04:01 AM


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  5. Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555
    #5 04-17-2018, 08:00 PM
    So do I need the front washer also along with this castle nut also ??
    Reply With Quote Reply With Quote
  6. 21XDC
    21XDC is online now
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #6 04-18-2018, 04:15 AM
    If you have the correct thrust washer, All you need is the part I posted for the splines to fit and engage. Then you use the tab washer under the nut to keep the prop from coming loose.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  7. Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555
    #7 04-18-2018, 02:29 PM
    I am
    guessimg i do not have the correct thrust washer for this prop as the one I have is fro
    s trophy prop do you by chance know the part number for
    thr thrust washer thanks
    Reply With Quote Reply With Quote
  8. Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555
    #8 04-21-2018, 03:33 PM
    Got the problem fixed just needed that castleated nut thanks
    guys for all the help now to test it
    Reply With Quote Reply With Quote
  9. Champ175
    Champ175 is offline
    Member
    Join Date
    Jun 2012
    Location
    Tampa KS
    Posts
    555
    #9 04-22-2018, 06:20 PM
    Tested her out today wot 5900 rpm s gps was 64.5 fully trimmed no rooster tsul
    a d great bow lift. My 184 was screaming that was with 1/8 of fuel and very little
    tackle so rpm shiuld drop but wow wat a diff in performance and speed gains 59-64 can’t complain bout that thanks again everyone for
    thr help
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »