The trolling motor pedal. I’m sure it is just want too double check.
Do we need nuts underneath? Or strong enough too hold 9” hummingbird with mount?
The trolling motor pedal. I’m sure it is just want too double check.
Do we need nuts underneath? Or strong enough too hold 9” hummingbird with mount?
Phoenix 618
Evinrude ETEC 150
Go Buckeyes
Go Browns
its fine to drill but personally I would use 1/4" stainless machine screws with fender washers and lock nuts underneath for mounting,
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
No way too reach up for nuts in this 12 618
gotcha, might want to use 1/4" lag bolts, if you go with screws I would step up to a #10 or #12
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
I have no idea how some people can install the nuts on those bolts unless it’s done by the factory before they put the top cap on the hull when they wire everything else in the boat but i know that that’s not possible since the finish work is all done before they even install these brackets, like the carpet and trolling motor itself. I recently installed my ultrex and had to remove my precision sonar bracket. I backed the nuts off until they almost came off the bolts and had maybe 2” of play. I pulled the bracket up and made just enough room to pull my fortrex pedal through and then slide the ultrex one down in. Then I tighten the bracket back down. I taped a wrench to the end of a breaker bar about 3ft long and reached up the rod lockers to do it.
2023 Ford F150 XLT Super Crew 2.7L Ecoboost FX4
2021 Phoenix 721/ Mercury 250 ProXS 4s
HDS16 Pro- Solix15 : Console
HDS16 Pro W/AT - Garmin 126 W/ lvs34 - Solix12/ 360 : Bow
Dual 10' Blades/ Lowrance Ghost/ Bobs Hydraulic Plate
225ah cranking / 100ah trolling. Ionic/Relion lithium
MLF Invitationals Angler
Instagram @brettcarnright
It’s all done. Thanks for info