-
Garmin 95SV
New to the Garmin family !!! I was told I can't link 2 or three echoMap Chirp 95sv,s to share waypoints ? Also was told there is no transducer that I can hook up to a 95sv to install in hull for 2D as well as speed is there anyway this can be done ?
thanks
Brian
-
Member
Both the nonCHIRP and CHIRP echoMAPs share wpts and routes via High Speed Protocol (blue/brown wires on unit PWR cables). You can only connect two units together via this protocol.
With the CHIRP units, to run an inhull 2D xducer, along with the GT30 for Side and ClearVu, you need this y-cable:
https://buy.garmin.com/en-US/US/p/pn/010-12445-33
The inhull GT8/GT30 is bundled together:
https://buy.garmin.com/en-US/US/p/614252
Note that with the y-cable, the only Side/ClearVu xducer that will work is the GT30.