I just bought an 02 Tr21 and my Father bought a 2010 21xs elite. I'm going to pull motor and reseal all of my bolts and what not. Do you think we should do the same on the XS? Also what is the best sealant to use?
I just bought an 02 Tr21 and my Father bought a 2010 21xs elite. I'm going to pull motor and reseal all of my bolts and what not. Do you think we should do the same on the XS? Also what is the best sealant to use?
2002 Triton Tr-21 Merc 250 Pro XB OT430582
Is it leaking around the mounting bolts?
As long as the bolts are NOT turned......Never.
Yeah around the mounting bolts and the other stuff that mounts to the transom. The mounting bolts got spun on my Tr 21 so I know I need to reseal them. I'm also adding a swim ladder that was ordered from Triton but never installed so I'll have to seal that up. I'm just more wondering what I should use? Let me clarify it is not "leaking" into the boat around mounting bolts more of I'm just worried about water intrusion into the transom. Thanks
2002 Triton Tr-21 Merc 250 Pro XB OT430582
3M 4200 works very well to seal the transom bolts or any penetration.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
2002 Triton Tr-21 Merc 250 Pro XB OT430582
Would it be completely necessary to pull the motor just to reseal the mounting bolts? I would think you could simply remove, reseal with 4200 or life seal, and replace each bolt one at a time without worrying with a cherry picker or motor lift.
I like to seal around the holes between the jackplate and transom, before installing the fasteners with sealer.
Triton's don't have any wood at all in the boat so if it does happen to leak it won't cause any damage like a boat with a wood transom and chine does.
Just because they're composite sure doesn't mean they don't need sealed. The composite it's made of could be anything (resin & sawdust) & it may not rot, but it can absolutley delaminate if water gets to it. Always seal all holes with a marine grade silicone that's made for underwater use. 3M 4200 is the best.
Last edited by Les Young; 04-15-2018 at 12:02 AM.
Yeah delamination is what I'm worried about. When this boat was just a few years old, the entire hull had to be rebuilt due to delamination. Tritons "Lifetime Guarantee" was a joke. They said they do not build an inferior product and the only way the hull could be delaminating was from "owner abuse" so $18k later and a couple hundred extra pounds of fiberglass and resin. The hull is rock solid. The extra weight probably cost a couple MPH but you can feel every wave under your feet. Learned a lesson there that when you can't feel the chop under your feet doesn't always mean your boat "rides that smooth" could mean your hull is flexing like a SOB.
2002 Triton Tr-21 Merc 250 Pro XB OT430582
The 02
2002 Triton Tr-21 Merc 250 Pro XB OT430582
I'm definitely not brand bashing I love the boat It's rock solid now. And will get up and fly with the 250xb. I'll never get rid of her.
2002 Triton Tr-21 Merc 250 Pro XB OT430582