hey guys,
(This may have already been done) but i wanted to share a little project with you guys i recently finished Incase some one else wanted to try it. After i got It out on the water during a tourment last weekend i was Impressed with how well it functioned.
All you you need are a couple ram mounts(which i already had laying around)
aluminum plate, the one i used Was .38” x 6.5” x 9.38”
#10 stainless bolts
some rubber washers
1.5” drill bit or holes saw
You can adjust the spread and height of the ram mounts depending on the size graphs you have. But this worked well for my HDS8’s
pre-fabbed mounts i had priced were over $300 so this saved me some $ for the set up i wanted.
http://i256.photobucket.com/albums/h...DF00968D4.jpeg
http://i256.photobucket.com/albums/h...897D94B1A.jpeg
http://i256.photobucket.com/albums/h...F5769E8C8.jpeg
http://i256.photobucket.com/albums/h...51A9F35F1.jpeg
http://i256.photobucket.com/albums/h...BD5FB758D.jpeg
http://i256.photobucket.com/albums/h...0184EB476F.png