Results 1 to 7 of 7
  1. #1
    Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,972

    Suggestion for Power Pole fluid reservoirs

    Not a complaint at all. Just a suggestion. It would be a nice feature if the fill lines on the reservoirs were maybe done with a black or other color ink line instead of leaving it clear/same as tank color. Once mounted it can be a little harder to see if you take a quick glimpse at it. I marked mine with a Sharpie but a more permanent mark might be beneficial to some customers. Again not a complaint at all just a suggestion.

  2. BBC SPONSOR
    Join Date
    Jan 2007
    Location
    Tampa, FL
    Posts
    350
    #2
    Mark,

    This is a very good suggestion. I will be sure to bring this up in our next meeting!

  3. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,941
    #3

  4. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,972
    #4
    Quote Originally Posted by PowerPoleTech View Post
    Mark,

    This is a very good suggestion. I will be sure to bring this up in our next meeting!
    Thanks...my old eyes ain't what they used to be....lol....loving my Blades 2.0 btw

  5. Member RenegadeBassin's Avatar
    Join Date
    Dec 2017
    Location
    Ellsworth, Maine
    Posts
    174
    #5
    Yes Mark I agree this would be very helpful. I currently use a flashlight in order to see them.
    2017 Lund Renegade 1875
    Mercury 115 Pro XS
    Spitfire X7 17p
    Fortrex 80
    Helix 7 Chirp GPS G2N
    Helix 10 Mega SI G2N
    Helix 10 Mega DI G2N
    Dual Power Pole 8' Blades



  6. Member eliteangler's Avatar
    Join Date
    Feb 2008
    Location
    Jones, OK
    Posts
    1,044
    #6
    Quote Originally Posted by Mark Perry View Post
    Not a complaint at all. Just a suggestion. It would be a nice feature if the fill lines on the reservoirs were maybe done with a black or other color ink line instead of leaving it clear/same as tank color. Once mounted it can be a little harder to see if you take a quick glimpse at it. I marked mine with a Sharpie but a more permanent mark might be beneficial to some customers. Again not a complaint at all just a suggestion.
    I did the same thing with the sharpie!! Good looking out!
    Sam Dunaway
    2005 Triton TR-21X
    Powered by Suzuki 250SS

  7. Member
    Join Date
    Dec 2011
    Location
    Lima, Oh
    Posts
    2,715
    #7
    when i installed mine i filled them out of the boat and marked them with a sharpie so i could see it