Figured I’d post up some pics for the hell of it. Maybe change the pace up around here.. I for one am looking forward to heading back up to the Bend this weekend!
Figured I’d post up some pics for the hell of it. Maybe change the pace up around here.. I for one am looking forward to heading back up to the Bend this weekend!
Last edited by Josh3105; 03-27-2018 at 12:07 PM.
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!” – Hunter S Thompson
2017 V20
2017 PRO XS
Well I tried anyway lol.. dang pictures.
the negativity continues
+
Don't feel bad, I cant post pictures either
Ricky Rutherford
2017 Legend V20
2017 250 Pro XS
Use tinypic.com and and make sure you change the size to (message board) and copy and paste the link.
Spoke to my dealer yesterday about an issue with my trailer. He told me to be looking out today for a call from Pete. Sure enough Pete called me this morning and explained everything I needed and answered all my questions. Can’t get much better than that
The easiest way for me to post pictures is put them on my PC in a folder. Locate that file and right click on it and open with "paint". Once in paint click the "resize" button on the home tab and resize by 50%. Save the file and close. On BBC Quick Reply, click on Go Advance (bottom right) and attach/upload saved reduce file size. Then insert attachment..... I have no idea how to do it from a smart phone
PETE!
Been having an issue with vibration when towing at interstate speeds. ~ 72+. Bad enough it would cause my whole truck to shake. I never experience it 90% of the time because I am never on the interstate unless I'm traveling to Lake Fork. Called EZ loader and they told me to balance the tires as they don't balance them at the factory. Balanced the tires and the issue may be a bit better but its still there. I called EZ loader back and they said that's the nature of the low profile tires and basically I would have to live with it. Talked to my dealer about it and he hadn't had a complaint about it but he would research it and get back to me. He did some research and told me to be expecting a call from Pete in the morning. Sure enough Pete called me yesterday morning and told me to check some bolts under the trailer (there are 4 of them and I do not remember what he called the specifically) and they needed to be tightened to 150 ft/lbs torque. He has seen cases where they were not torqued properly and would cause this issue. Next he said to take off the Legend ladder and try that. He said he has seen where the tall handle of the ladder will have a vibration due to the wind resistance and throw off the trailer harmonics. The newer illusion trailers from EZ loader are coming with additional bracing to combat this issue.
Can you be more specific re the 4 bolts you tightened
If you have a vibration from the trailer it’s tire related. You did the balance I see. Did they look for a bad tire? If a tire is seperating it can be hard to find in the beginning stages. In other words. When cold the tire may look fine but as it heats up it will start coming apart and cause a vibration. Loose bolts, ladders, etc in them selves won’t cause a vibration. The truck vibration touched on is a posiblity as well.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
Yea, could be a broken belt in the tire also