Replaced the fortrex with an ultrex
i have two gps pucks already
where have y’all mounted the ultrex heading puck?
Replaced the fortrex with an ultrex
i have two gps pucks already
where have y’all mounted the ultrex heading puck?
Mine is on the carpet in upper left hand corner of bow....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
I put mine centered on the non skid pad at the front next to the trolling motor. Easy to pull the line back to the fuse box.
Mine is right behind my seat by the puck for my lowrance
2018 Phoenix 919, Mercury 225 Pro XS
2016 Triton 179TrX, Mercury 115 4s
1995 Bass Tracker 175Pro, 40hp Force
1985 Bass Tracker 1800 Johnson 150 (I called it the lead sled)
I checked mine (Terrova) with a magnetic compass first then put it in front of the console tucked in the right corner next to the gunnel.
Thanks guys. Can I power it off one of the spare switches?
power it on your accessory or something you always turn on anyways if you want it switched for some reason. you can put the sensor in a compartment or under the bow it just needs to point the right way it doesnt need line of site or anything else.
What exactly does the heading sensor do? My ultrex works fine whether I pair it or not. I have Lowrance units.
I have lowrance also. I have been told it’s for the spot lock for the lowrance users. Of course I could be be totally wrong.
2018 Phoenix 919, Mercury 225 Pro XS
2016 Triton 179TrX, Mercury 115 4s
1995 Bass Tracker 175Pro, 40hp Force
1985 Bass Tracker 1800 Johnson 150 (I called it the lead sled)
Pretty sure it helps in knowing what way your boat is facing and helping the jog feature work correctly.
heading sensor tells it which way your boat is facing which it only needs if you use spot lock and then the remote to jog a direction 5 feet at a time.
If you dont use your remote ever then you dont use jog and you dont need the sensor.
Thanks Jeff for the explanation.
I ended up putting it on the bow near my Humminbird puck
I wired it to the TM power source as i couldn’t find anything else up there
got out yesterday - this thing is great - I’ve had an ulterra on a previous boat and this is much better
The tm power source? Let's hope your running a 12v trolling motor or I'm missing what your saying.
Yea going to fry up at 24 or 36V
Yikes - didn’t Think of that. It didn’t fry. I’m gonna double check the wiring - something seems off
If you have a depth finder up front (sure you do) tap into the power leads for that.....the puck will cut on/off with the main switch on boat. Thats what i did, in fact i bought a dual buss bar, placed the power from depth finder on bar, and added the puck, Garmin Panoptix ducer and Garmin unit to buss bar. Cleaned up the wiring and works great.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Yes there’s one up there. I got in a hurry toward the end and did what looked easiest. Oh well.