-
Member
Smartcraft Installation HELP!
My 2016 Cougar/250 ProXS came from the factory with a Level 2 Mercmonitor and an oil tank that transmits its level to the Mercmonitor. I am upgrading to all Smartcraft System Link gauges.
I have hit a dead end with the Fuel/Oil Harness. I found where it connects under the motor cowling and traced it into the bilge. I followed the harness line to the oil tank and it is marked as Tank2/Other. Now, I followed the other harness line and it disappears behind the starboard fuel tank. It travels up the boat, past the throttle/shifter and up in under the dash. It disappears in a spider web of wires and cables. WHERE IS THE OTHER END? Does it go to the touch pad and if so how can I connect it into the Smartcraft system.
Hull ID is BASM2974C616 if it helps.
Last edited by 06 SB; 03-20-2018 at 07:10 PM.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
-
Member
BCB I saw your reply on the tapatalk owners board.
Thank You!
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s