Hey, can anyone recommend what type of fenders (bumpers) work well on the RT hulls, based on your experience...?
Hey, can anyone recommend what type of fenders (bumpers) work well on the RT hulls, based on your experience...?
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
https://www.amazon.com/AKUA-Aluminum...um+boat+fender
I use these on my RT188. I have been pleased with them so far. I started out with the cheap contour bumpers. They worked, but I definitely like the Akua product better. These are the same fenders that are offered on the Rangerwear site.
I have one from Ranger wear, they are nice quality and fit the boat well.
FTO Marine Supplies
BBC Sponsor
I bought 2 of the RT bumpers from Ranger and they work good and stay in place too.
2022 Xpress H17 - Yamaha SHO 90
2018 Ranger RT198P
Mercury 150 4-Stroke
If you want to spend a third more buy the Akuas from Ranger. You can get them on ebay or order them direct from Akua for a lot less. Great boat fenders for the aluminum crowd. It doesn't matter if you have a Ranger, Tracker or other manufacturers boat they really are nice.
Eat, Sleep, Hunt & Fish
2010 Tracker Tournament V18 18' 3"
Mercury 115 Optimax, Mercury Spitfire X7 Prop 19P
Minn Kota 70b Thrust Maxxum
6 inch CMC Pro Hi-Jacker
Lowrance Elite 7 TI (Bow)
Lowrance HDS7 GEN 3 Touch (Console)
Smartcraft Merc Monitor (Basic)
Thanks all... I will look into the Akua product...
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
I have the Ranger ones like the Akua hard plastic kind. I've ended up liking these better.
Don't have to worry about the suction cups coming off. Just slip the rope loop over the cleet and go.
https://www.wholesalemarine.com/bass...xoCs5YQAvD_BwE
Ranger RT188 (2015)
Mercury Optimax ProXS 115, 4" Setback Plate
Minn Kota PowerDrive V2 iPilot 70lb
Garmin 73SV @ Helm, 93SV Chirp @ Bow
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
I think his cleats are inside like mine on the 178
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
I have never seen the tailor made bumpers before I like the style and might try one myself. I have the common style you throw over the side and some flat rectangle ones from Bass Pro and neither one work great.
----------------------------
The bitterness of poor quality is remembered
long after the sweetness of low price is forgotten - Benjamin Franklin
2013 RANGER RT188 - YAMAHA F115 - ULTREX - LOWRANCE GRAPHS
LOCK-N-HAUL Transom Saver, ALL ABOARD Emergency Ladder
1996 RANGER CHEROKEE - 40 YAMAHA
Panama, my only concern is how this type would lay on the gunwale, based on my cleats being top/center of the gunwale vice the inside edge, which I believe is the 188 configuration (please confirm). I agree, I do like the Tailor Made style / design.
My thinking is that if my para-cord (lanyard) was pretty tight it may be effective, but it would be on top of the cleat and I'm just not sure if that will provide adequate gunwale protection... Thoughts?
2018 Ranger RT198p
Charcoal Metallic
Etec 150HP G2 HO
24p Raker Stainless prop
82# MotorGuide Tour Pro TM
Fishes as good as anything out there, with the TM down...
I use the above combined with https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
for my '14 Tracker. Works well since Tracker cleats are on top of rail and poorly positioned for bumper protection. I use one pair of the perkos fore and aft on each side of the boat with one pair of the bumpers.
These are the ones I use....https://www.cabelas.com/product/Cabe...8.uts?slotId=6
Wish I could help...and I understand what you are asking. I just don't know. If it did not match up, I figure the fender buoy could be adapted a little with some silicone on the bottom using the paracord. Even without it, I bet it would be OK...and yes the RT is on the inside. By the way...on the one toward the rear, I usually tie it off on the grab handle for the passenger and use the cleat for the dock.
----------------------------
The bitterness of poor quality is remembered
long after the sweetness of low price is forgotten - Benjamin Franklin
2013 RANGER RT188 - YAMAHA F115 - ULTREX - LOWRANCE GRAPHS
LOCK-N-HAUL Transom Saver, ALL ABOARD Emergency Ladder
1996 RANGER CHEROKEE - 40 YAMAHA
I have cleats on the top of my gunnels also. I considered the regular Taylor Made boat bumpers but they take up too much room in my tin boat. However, the Akuas I use on my boat have never given me any issues and to date has stayed where I put them. They are much easier to store and take up less room.
Eat, Sleep, Hunt & Fish
2010 Tracker Tournament V18 18' 3"
Mercury 115 Optimax, Mercury Spitfire X7 Prop 19P
Minn Kota 70b Thrust Maxxum
6 inch CMC Pro Hi-Jacker
Lowrance Elite 7 TI (Bow)
Lowrance HDS7 GEN 3 Touch (Console)
Smartcraft Merc Monitor (Basic)