-
a98 Chart Display
I have a98 19.03 updates. Use Navionics Platinum+ maps.
I am not able to display the US/Canada border on Lake Erie.
My Navionics on my phones show the border.
Any suggestions?
-
Honda / Raymarine Moderator
On my Navionics+ chip, which is a few years old, I had to first down load onto the chip the area I wanted installed on it from a computer.
When you install the chip in the unit you have select the sonar map to see the contour lines.
Hope this helps!
-
I have all contour lines, just not the US border line.
-
Honda / Raymarine Moderator
Can’t help ya on that.
Go to Raymarine and there is a forum there with some great help
Ask on there, or ask Navioncs
-
You mention 19.03, did you have the lines before an update? Trying to determine if this is new issue or something ongoing.
Current software is version 19.03, so we are food there.
Last edited by Jig34; 03-17-2018 at 02:50 PM.
-
Good question, I have never had them. I need to fire up my 2003, RL70 to see the Border.
-
I'd suggest calling Navionics. The units read the information on the chart card. Typically, if the information is there we read it, if not, we don't.
If the chart card and your phone are the same chart, it will read different. Make sure you are comparing apples to apples.