are there any instructions/parameters on when to do hard reset vs soft reset?This is for hds carbon.
thanks
john
are there any instructions/parameters on when to do hard reset vs soft reset?This is for hds carbon.
thanks
john
2018 Tracker 190 TX
Torqeedo 10.0
Humminbird Helix 12 G4N MDI+/SI+
Minn Kota Ultrex 80
Thanks jyu.
i have seen that page in knowledge base info.
i guess I really meant when to use hard vs soft reset.
when I have a function ,connection,or source that I don't think is running right,it is sometimes difficult for me to decide where my error is,did i input wrong data,or wrong setting,and which way to go to correct my problem.
a guideline by lowrance would be really helpful,especially when we have several mfd that are networked with module,and several devices connected via nmea on that grid
With more than one mfd,do i hard/soft reset each unit,or one at a time and wait and see?
.
sort of like a algorithm to diagnose and treat.
john
Is the process the same on a HDS-12 Gen2 ?
Thanks for the post.!
Ed
User error: soft reset
Unit error: hard reset
If in doubt: hard reset