201proxl. Wonder what the silver bow panel inserts would look like if I replaced them with cutting board inserts like I used to fill the depth finder hole? Could use red, grey or black. The boat is red.
They are all starting to split on the sides where the screws go thru.
or you could send them to us and get them done in whatever finish you want.
Maple syrup... I put that sh*t on everything!
'09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel
Use whatever material you want and get some vinyl you like.
The problem is they are cracking. So not something I can over.Originally Posted by kandkkustomzhydrographics
C and O marine has replacement panels on their site.
They don’t even list parts on the website now. It just says call for parts.
yes Carol said they had an issue with the parts site and have to have a whole new website designed so will be down for awhile.
theres a reason the boat manufacturer's, car manufacturer's do not use dynok or vinyl, it simple doesn't last and has limited uv resistance.
And then you wrap it again lol. Seriously, mine is going on almost 5 years and no problem. I bet I didn't spend more than $20 for eveything either.
I’m going on 14yrs. No cracks.
Charley
2019 Phoenix 919 PRO XP
225 pro XS 4 stroke mercury 24p fury
model # 12250033A
motor serial # 2B599078
I had a 21 foot stratos and had same issue, so I used some solid surface like a person would use in a kitchen. I traced old, polished, and it was awesome looking. no more weather issues and was best I ever saw on any boat. Can't believe company's don't use this. Cut and router and drills like wood.
Made mine and hydro-dipped myself. Write up as to how I did it in the link below.
http://www.bbcboards.net/showthread....hlight=dipping
Reply With Quote