-
Shaking Humminbird?
Installing Humminbird to the right of console on a 6" Ram mount. Even after tightening wing nut on Ram mount when running down the Unit shakes. Anyone have a solution to this concern?
-
You might try putting a piece of plywood or starboard inside the console to strengthen the area where it mounts
-
Lowrider58 first thing I checked was the stability and thickness of the location to be used to mount the ram mount base. There is a small substructure made into the upper cap of the boat at the location I chose for the ram mount to be placed. I have, in the past, used a short cord attached to one of the windshield attachment bolts and the Humminbird's mounting bracket. This appears to work but looks bush league.
-
Is the unit itself shaking and not the mount? If so, check the mounting bolts that attach the unit with the unit's mounting bracket. I too had a similar problem and the problem was the mounting bolts. If backing loose put a little lock-tite on the bolts. (NOT THE RED).
-
a buddy used a piece of hurricane tie with a rubber stopper on it, and lowered his ram mount all the way down until the rubber stopper met the boat, then locked it tight... doesn't budge.
https://photos.app.goo.gl/DmdKzQvpJW2NOa9g1