so after my boat lift failed last season, my boat sat in the water for over a month tied to my dock. I ended up with a scum line and general build up below the water line.
Does any one have a good product to get this off? I tried bassboat saver but it didn't get it off. Looking for that magic product that works.
On & Off hull cleaner
2021 Phoenix 920 Elite / SHO 250
Bullet 21XD / 250 XB (Gone to a great home in LA)
"There is no such thing as a bad day fishing!"
Once you get it off considered putting ceramic pro 9h on your boat. Is permanent bond and you will never have to wash/wax again. Just spray off with water from hose and its like new again. Detailer did my boat and outboard. First he washed waxed/polished boat to shine and then added the coating.
Star brite hull cleaner is pretty good stuff. Get mine at academy sports. Will prolly take polish off
Pro-tec products. Great stuff and a BBC sponsor!
I use a 50/50 water / white vinegar mix and have had good results. Might need a stronger mix in you case.
My boat was in the water from mid-April to late-October last year, minus two weeks in July. 50/50 water and vinegar took any scum line right off.
Yes to Vinegar . Works very well and when others dontOriginally Posted by 1badz71
safe and easy hull cleaner safeandeasyboatcare.com
Pur Kleen, spray on rinse off, ezy-peezy
I have stopped inviting my friends but they come anyway
That's not what he meant. Your reading comprehension skills are in the top 30 percentile. And, so what?I have stopped inviting my friends but they come anyway
I have stopped inviting my friends but they come anyway
Who controls John Gill?
Try Shurdolds Buff Magic , it does a good job and will not effect your finish , I had a hard time getting water spots off my engine cowl and it worked like a dream leaving no marks on the dark blue surface .
White vinegar hot from the microwave mixed with Dawn dish detergent. Mix it while the vinegar is hot 50% Dawn 50% vinegar in a spray bottle from a parts house and shake it up to mix it. Junk Walmart type sprayer won’t handle it. Spay it on and let it set about 30 minutes. Take hose and sponge and wash it off. You will be amazed. For the motor use straight CLR and a rag.
wear rubber gloves and a inconspicuous spot, try some CLR... // at least wasn't salt water and grew Barnacles lolo
Reply With Quote
