Hole Under Trolling Pedal

[Redngoo]

I cut a 4.250( i believe that was the size) hole under the pedal of my p2. With a hole saw. I have a Bbt double, i did not have to notch the hole.

[Knuckle]

What are these?

google rubber isolation spacer. 1/2” tall x 1” diameter is plenty. Place them under the rubber feet on the tm pedal before you screw it to the deck. U need 4.

[BASStex1988]

The round hole is certainly factory but the notch is not. I have been researching doing some type of dual stack at the bow and there are guys saying they have to notch the hole in order to get a backing plate under the deck for support of the two units. No one has posted pictures though. Do you by chance have a dual stack at the bow?

do install the bbt backing plate you can take off the panel that your tm connects to. You can fish that plate through there and stick your hand in the hole that is under the trolling motor. It’s not worth it to me to notch or cut the fiberglass for a one time install. You won’t be taking that thing on/off every month.

[anderson215]

What year did they start adding access holes from the factory?

[Bass Cat Boats]

Only if they must access for a bolt mount. It’s not on all models.

[rlb8s]

Only if they must access for a bolt mount. It’s not on all models.

What size hole does BCB cut? 4 or 6"