I've had 3 EZ Loader tamden trailers. Last two had brakes on the rear axles, this one has brakes on the front axle. Is there a particular reason for the change?
I've had 3 EZ Loader tamden trailers. Last two had brakes on the rear axles, this one has brakes on the front axle. Is there a particular reason for the change?
I got nothin
Can't say--- as I have never seen one set up that way.
I have been told for years it was a no-no.. because it would have a tendency to hop under hard braking.
It was explained to me that when the front brakes are applied the rear axle will have a tendency to rotate up..
What kind of axles? Torsion axles usually have the brakes on the front.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
I got nothin
Torsion on front and sprung on rear.
The geometry of the center pivot will help plant the axle when braking.
I've never seen a braking rear axle hop and I've had one trailer that the shock went out on the braking slide and it applied extra hard and right now.....still no hop?
You will see'em both ways though and either will work fine.
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
Cold and raining, but I did look and there are no springs on the front axle. Couldn't see the rear as yet. As far as hop, I had a bad hop once but the trailer was empty. Not on this trailer.
I got nothin
Thinking about it, sprung axles will hop when backing up with rear axle brakes IF the reverse lock out solenoid is not working.
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
CatFan is correct, torsion brakes on front, spring axle brakes on rear.
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe
I'm at one all week. Just so I can say I have seen one will you send me a picture ?
20XDC Bullet/Modified Merc 260
295TF Charger/Merc 225X-Sold
20' Contender Pickle Fork/Merc EFI Bridgeport-Sold
18' Stratus with Sommerford Tunnel Vee Hull/2.4 EFI Merc High Perf-Sold
Freedom 240DLX Toon/Merc 115
10' Cougar Cub/Merc 25 on the Bottle
18" Homebuilt Tunnel/.021 OS Max Outboard on 50% Nitro with a Pipe