You are probably right. Here's the numbers after break-in with a 26 Fury:Originally Posted by tdt91
Water surface temp: 52 to 60 F
Full tank of gas and full livewells
165 lb pilot
6100 rpm
12-16 psi water
65.4 mph
* no vent plugs... should I put some in?
(Gonna try that 27 Tempest next)
Last edited by CDN Bass; 05-07-2018 at 05:24 PM.
Maple syrup... I put that sh*t on everything!
'09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel
I'm starting to understand this HJP.... I got 69.4 mph today with the same set up and conditions.
Maple syrup... I put that sh*t on everything!
'09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel
Dude if you are turning a 26" Fury to 6100rpms and only getting 65 mph, you have a lot of slip. Are you running smartcraft gauges?
No SmartCraft 'yet'. On their way.
As for slip... yes. I figured that out with the HJP. I raised it up a little and trim out less, which gave me more bite and less rooster tail. The RPM's came down to 5800 and mph up 4.
I need a trim gauge for the plate... any suggestions?
Last edited by CDN Bass; 05-10-2018 at 12:01 PM.
Maple syrup... I put that sh*t on everything!
'09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel
Reply With Quote