I'm looking at getting a couple of 10' Black/Black talons for my 2004 Nitro 901 CDX. Going to have them mounted on the jackplate. What else will I need besides the talons and the jackplate brackets? I will also be going with a set of tilt brackets.
I'm looking at getting a couple of 10' Black/Black talons for my 2004 Nitro 901 CDX. Going to have them mounted on the jackplate. What else will I need besides the talons and the jackplate brackets? I will also be going with a set of tilt brackets.
They will come with everything. All you will need is to figure out where to run the wire thru the hull and how you want to do it.
https://haywardsupply.com/products/7200_gaffrig
I used one just like this that fits 3/8"
Quick release electrical connectors are nice, but not required.
The talons come with everything needed to install. There are some options that are nice like quick release plugs, but they will mount on the mounts right out of the box. The JP mounts could need a shim, depending on the type of jackplate. If I can help, give me a call.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Foot switch!
RH
Disconnect switch so you can cut power off when not in use. This eliminates any parasitic battery draw and it also eliminates any chance of accidental deployment.
You can wire both Talons to one disconnect. This one has a more than sufficient power rating and its priced decent.. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1