Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2013
    Location
    Tennessee
    Posts
    223

    Prop Lock Nut question

    I bought a prop that has a rubber hub that does not have any way to lock the prop nut tight. I have this piece that is used to lock the prop nut in place for one of my aluminum props. Can I use that piece to lock the prop nut in place safely? I've tried to attach pics for 30 minutes and I can't seem to get the pics to upload.
    2019 Skeeter ZX225

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #2


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Aug 2013
    Location
    Tennessee
    Posts
    223
    #3
    That's what my piece looks like for the aluminum prop. So I should have no worries about the prop nut coming off right?
    2019 Skeeter ZX225

  4. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #4
    As long as you have spline engagement and use the merc bend over tab washer under the nut.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html