I need a bow panel for a 2002 TR20

[bbqpitboss]

I know about C & O just thought I would check BBC first. Anybody got one?

[Bartman]

Make your own and customize it. I had approximately $50 in this one and 5 hours. I used the original as a template for the perimeter.



Original



Custom with speepdo gone and gauges moved so I could mount Helix 12.

Here's what I use for material
https://www.mcmaster.com/#standard-p...heets/=1bwdgz7

I already had a 36" x 36" roll of the carbon fiber adhesive decal

[Savage]

Here's my custom Bow and Console panels made from 1/8" thick aluminum sheet metal.....

[Bob G.]

Nevermind......read bow and thought console.

[BB Tr 21]

Hey Bart man, what type of sheets did you order? Seems to be a lot to choose from.

[bbqpitboss]

Savage , that looks good. I may end up going that route but the molded trim around the inner panel is pretty rough on mine. I’m working with C&O right now to find one. Thanks for the help

[Bartman]

Hey Bart man, what type of sheets did you order? Seems to be a lot to choose from.

For some reason the first link won't take you to the exact sheet... Click here 2888K12

[Phishinguy]

Did she Find you the foam trim piece? I emailed her earlier in the week about it and haven't heard back. If you are looking for just the wood grain plastic panel I will give you mine.

[bbqpitboss]

Phishinguy, is your out of a 2002 model? I could text you a picture of mine to compare. I’m not sure they are going to have it.