Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jul 2013
    Location
    Indianapolis Indiana
    Posts
    631

    Jumper Switch Use

    Is using it as simple as turning it to the jump position then starting the motor then immediately turning it back?

  2. Member
    Join Date
    Aug 2004
    Location
    Amherst
    Posts
    218
    #2
    As far as I know yes. I have never used it. You could put a volt meter on the cranking battery before switching.. Then switch to the jump position, put the meter back on the crank battery and see if the voltage reading is increasing. That way you know you are hooked up correctly.